Send Email
Send SMS

Home »

Custom Profile

Manufacturing Process

Manufacturing Process

Today I would like to share you the details of producing CCTV camera from VIDTECH.

1. Purchase the material and PCB from other suppliers, and assembling them.
Firstly, put the PCB on Solder Paste Printing Machine. Secondly, through 2050 chip mounter for 3 minutes, so IC will have it on PCB , then solder the DSP on PCB board. Thirdly, put the PCB in the Reflow Soldering machine for SMT about 5 minutes.

2. Print the CCD chip on the CCD board and test the CCD board
We need to solder the Power port, Video port (BNC) on CCD board, and clear it by Ultrasonic cleaning equipment. Then it will solder the crystal oscillator on CCD Board. So the CCD will become semi-finished products.

3. Led panel process
a. LED Panel material
b. Sticker — These position which connected with IC ,plug, capacitor and light sensor must be covered by sticker
c. insert the Leds
d. put the Led panel into Tin’s machine, so that to fix the IR led.
e. cut the feet of Led
f. remove the sticker
g. solder the IC , resistor ,capacitor, third transistor.
h. clear the LED Panel and solering the photosensitization
h. test the LED Panel by machines, cos there are several common problems : such as: led light is not bright or a little yellow color, or the light brightness is not conform.
And the LED Panel had been finished.

4. CCD Board against test
It will be aging in indoor constant temperature for 40 degree and 48 hours. If the Camera has IR CUT function, it should be open the relay timer in order to change the pattern of day or night. We can switch it for 288-300 times for aging 48h.

5. Test the lens of cameras through focus them. And test the semi-finished product by workers.

6. Semi-products aging test

7. Assemble the outer shell of the camera, so the camera has been finished product.

8. Cameras aging test for 48h.

9. Test the cameras
Waterproof test and constant temperature/voltage test. Iris,etc. If it is qualified, then it will put in passed inspection area.

10. Make packaging.

11. Inspect the cameras by normal sampling inspection

12. Qualified products will put into the warehouse.

For more information, pls visit our website or contact us freely.


Contact via E-mail
Contact via SMS
Security Plus Electronics
Sabyasachi Halder (Managing Director)
Security Plus Electronics Wholesale Store, Beside Jaiswal Restaurant, Somwar Bazar Road, SitaBuldi ,
Nagpur - 440012, Maharashtra, India
Call Us: 
Call Response Rate: 70%
Share Us :

Home  |   About Us   |  Products & Services  |  Site Map  |   Contact Us

© Security Plus Electronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Security Plus Electronics